rev. 2.6.09_135 AD2412N3L series 1 of 2 embedded power for business-critical continuity AD2412N3L series 24 watts special features ? universal ac input ? fully regulated output ? en61000-3-2 compliant ? overcurrent and overvoltage protection ? high efficiency ? high mtbf ? iec320 ac input receptacle 3 pin (type c14) ? built in emi filter ? (cispr 22 class b) ? led power good indicator ? ac input fuse ? complies with one watt input energy star / blue angel requirement ? ce mark emc & lvd ? meets k.21 basic surge requirement total power: 24 watts input voltage: 90 - 264 vac # of outputs: single electrical specifications safety input input range: 90-264 vac (wide range) frequency: 47-63 hz inrush current: 50a maximum @ 230vac, cold start 25 c input current: 1 a maximum efficiency: 82% typical emi/rfi: fcc part 15, class b & en55022 (cispr 22) class b safety ground leakage current: 250a maximum@ 50/60 hz, 264 vac input output maximum power (po): 24 w hold-up time: 20 ms. minimum at full load @ 115 vac, 60 hz overvoltage protection: 28 v latching type, recycle ac to reset. overcurrent protection: output short circuit protection auto recover overload protection @ 2.5 - 5a thermal protection: latching type, recycle ac to reset cable/connector : dc cable length 2.5 mm center plug dc plug center +v dc plug outer -v ul ul 60950-1 csa csa-c22.2 no.60950 tuv en/iec60950-1 ce mark lvd and emc ccc certificate cb certificate ? ? ? ? ? ? operating temperature: -5 to +50 c ambient storage temperature: -45 c to +85 c electromagnetic susceptibility: designed to meet en61000-4-2, -4, -5, level 3; en61000-4-3, -6, 6v/m; en61000-3-3 and en61000-3-2 class a humidity: operating; non-condensing 5% to 90% rh mtbf calculated: > 850,000 hours at full load and 25 c ambient conditions, telcordia sr332 issue 1 (method 1, case 3) environmental specifications
rev. 2.6.09_135 AD2412N3L series 2 of 2 embedded power for business-critical continuity mechanical drawing ordering information model number maximum power output voltage minimum load maximum load peak load 1 regulation 2 ripple p/p (pard) 3 AD2412N3L 24 w 12 vdc 0.1 a 2 a 2.4 a 5% < 120 mv 1. peak current lasting 200ms every 3 seconds. 2. at 25 oc including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20mhz bandwidth and 10f (tantalum capacitor) in parallel with a 0.1f capacitor at rated line voltage and load ranges. ac inlet 1.89" (48) 4.13" (105) 47.25" (1200 ) model label 1.30" (33) notes: 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is 0.02 (0.5mm) 3. warranty: 2 year 4. weight: 0.61 lb./ 0.28 kg 5. ac input power cord sold separately 6. specifications at factory settings at 115vac input, 25 c unless otherwise stated 7. ac input connector: iec320, c13 americas 5810 van allen way carlsbad, ca 92008 usa telephone: +1 760 930 4600 facsimile: +1 760 930 0698 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom telephone: +44 (0) 1384 842 211 facsimile: +44 (0) 1384 843 355 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong telephone: +852 2176 3333 facsimile: +852 2176 3888 for global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com while every precaution has been taken to ensure accuracy and completeness in this literature, emerson network power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. emerson network power and the emerson network power logo are trademarks and service marks of emerson electric co. ?2008 emerson electric co. emersonnetworkpower.com embedded computing embedded power monitoring outside plant power switching & controls precision cooling racks & integrated cabinets services surge protection emerson network power. the global leader in enabling business-critical continuity. ac power connectivity dc power
|
